The effects of the column pressure drop on retention and efficiency in packed and open tubular supercritical fluid chromatography

The effects of the pressure drop across the column on retention and efficiency in SFC have been studied. Numerical methods are described which enable the prediction of hold-up time and pressure drop in both packed and open tubular columns. Predictions of both hold-up time and pressure drop are in good agreement with experimental data. The density gradient along the column can be calculated using the numerical methods and a procedure is described which enables the calculation of the overall capacity factors of the solutes from the density profile in the column. Significant variations of the capacity factor are observed along the column. The effect of the density gradient along the column on local diffusivity and dispersion is studied. The column efficiency in systems with significant pressure drops is affected by changes in: the linear velocity of the mobile phase; the diffusion coefficients; and the capacity factors of the solutes along the column. The overall efficiency of the chromatographic system can be calculated if, as is the case for open tubular columns, adequate plate height equations are available.     

Asymmetric Catalysis by Vitamin B12. The Mechanism of the Cob(I)alamin-Catalyzed Isomerization of 1,2-Epoxycyclopentane to (R)-Cyclopent-2-enol

The isomerization of 1,2-epcxycyclopentane ( 1 ) to enantiomerically enriched (R)-cyclopent-2-enol ( 2 ) in protic solvents is catalyzed by cob(I)alamin. The enantiomeric excess (e.e.) of (R)- 2 is usually ca. 60%; it is only slightly dependent on the temperature, but increases with decreasing dielectric constant ε of the solvent. Standard kinetic methods show the reaction to be first order in vitamin B₁₂ and zero order in 1 . The rate constant increases exponentially with increasing ε of the solvent. An Arrhenius plot at ε = 40 gives activation parameters ΔH^≠ = 78 ± 4 kJ·mol^?1 and ΔS^≠ = ?49 ± 1 J·mol^?1·K^?1. The isomerization 1 → 2 proceeds in two steps (Schemes 2 and 7): (i) The epoxide ring is first opened by the proton-assisted fast and irreversible nucleophilic attack of the chiral Co^I catalyst to form diastereoisomeric (1R,2R)- and (1S,2S)-(2-hydroxycyclo-pentyl)cob(III)alamins 6 in a ratio of ca. 4:1 which are the dominant species in the steady state; (ii) The intermediates 6 then decompose in the rate-limiting step to form 2 and recycled catalyst. Experiments with specifically ²H-labeled 1 showed the hydro-cobalt elimination 6 → 2 to be non-stereoselective. It proceeds via reversible Co? C bond homolysis to a free 2-hydroxycyclopentyl radical from which stereoelectronically controlled H-abstraction by Co¹¹ takes place.     

Über die Strukturaufklärung von (Hydroxy-oxo-cyclopentenyl)alkansäuren,den Aldolkondensationsprodukten von Dioxoencarbonsäuren aus Rinderleber

Structure Elucidation of (Hydroxy-oxo-cyclopentenyl)alkanoic Acids, the Aldol-Condensation Products of Dioxoene Acids from Cattle Liver During homogenization of cattle liver the highly instable dioxoene acids 13a , 13b , and 13c are formed. These acids cyclize in alkaline solution to yield pairs of stable (hydroxy-oxo-cyclopentenyl)alkanoic acids, which were isolated as methyl esters 4a / 5a , 4b / 5b , and 4c / 5c . The structures of these compounds were deduced from an enriched 3-mg mixture sample by microchemical reactions combined with a GC/MS analysis of the reaction products. Compound 13a was obtained as methyl ester by oxidation of the methyl ester of the corresponding F-acid with NaOCl. It was not possible to isolate 13a in pure form due to its high sensitivity. Instead of the methyl ester of 13a , 4a and 5a were isolated, of which the structures were established.     

On-line coupling of sequential injection extraction with restricted-access materials for sample clean-up and analysis of drugs in biological matrix

In this contribution, the on-line coupling of solid phase extraction (SPE), based on a restricted-access material (RAM), with sequential injection technique (SIA) for the analysis of biological samples, is described. The SIA-RAM system was tested with a new potential antileucotrienic drug (VUFB-19363 (Quinlukast)) for serum analysis. The method is based on SPE with the novel internal-surface reversed-phase column packing material-alkyl-diol silica (ADS). The supports tolerate direct and repetitive injection of proteinaceous fluids (plasma, serum) and allow reversed-phase partitioning at the internal surface. A column packed with a 25 microm C18 alkyl-diol support was used for direct serum injection. Using a 6-port selection valve and the system of three mobile phases, the polar matrix compounds and metabolites are removed by sequentially aspirated mobile phases with lower content of the organic part (methanol-water (2:98) and following acetonitrile-water (20:80)) to the waste, and then, the analyte enriched on the column is eluted by a strong mobile phase (acetonitrile-methanol-water (40:20:40)) to the UV detector without transfer loss. With the fully automated SIA system, a total analysis time of less than 10 min was achieved. The only off-line sample pre-treatment step required to remove particulate matter was centrifugation. The studies showed a range of linearity (2-40 microg ml(-1)) and a high recovery (93.6-96.8%) of drug from the biological matrix with coefficients of variation (RSD) less than 5.0% (n = 6). This paper introduces a new, simple and robust analytical technique suitable for screening determination and direct analysis of drugs in biological materials.     

The Staudinger ligation-a gift to chemical biology

Although the reaction between an azide and a phosphane to form an aza-ylide was discovered by Hermann Staudinger more than 80 years ago and has found widespread application in organic synthesis, its potential as a highly chemoselective ligation method for the preparation of bioconjugates has been recognized only recently. As the two reaction partners are bioorthogonal to almost all functionalities that exist in biological systems and react at room temperature in an aqueous environment, the Staudinger ligation has even found application in the complex environment of living cells. Herein we describe the current state of knowledge on this reaction and its application both for the preparation of bioconjugates and as a ligation method in chemical biology.     

The electronic structure of benzvalene : Photoelectronspectroscopic studies

The photoelectron(PE)spectrum of tricyclo[3.1.0.0^2,6] hex-2-ene(benzvalene 1) has been recorded. The first four bands in the PE spectrum of 1 can be assigned to transitions to ²B₂, ²A₁, ²A₂ and ²B₁ states of 1¹. This assignment is discussed in terms of the results of semiempirical and ab initio calculations on 1. Furthermore the highest occupied MO's of 1 are derived qualitatively from an interaction diagram between a distorted bicyclobutane and an ethylene moiety.     

Equilibrium of the reaction between dissolved sodium sulfide and biologically produced sulfur

The equilibrium of the heterogeneous reaction between dissolved sodium sulfide and biologically produced sulfur particles has been studied. Biologically produced sulfur was obtained from a bioreactor of a hydrogen sulfide removal process in which the dominating organism is Thiobacillus sp. W5. Detailed knowledge of this reaction is essential to understand its effect on the process. The results were compared with the equilibrium of the reaction of sulfide with ‘inorganic’ elemental sulfur. The equilibrium between dissolved sodium sulfide and biologically produced sulfur particles can be described by an equilibrium constant, K_x, which consists of a weighted sum of constants for polysulfide ions of different chain length, rather than a true single equilibrium constant. For biologically produced sulfur pK_x = 9.10 ± 0.08 (21 °C) and 9.17 ± 0.09 (35 °C) with an average polysulfide chain length x = 4.91 ± 0.32 (21 °C) and 4.59 ± 0.31 (35 °C). The pK_x value for biologically produced sulfur is significantly higher than for reaction of dissolved sodium sulfide with inorganic sulfur (pK_x = 8.82; 21 °C). This difference is probably caused by the negatively charged polymeric organic layer, which is present on biologically produced sulfur but absent with “inorganic” sulfur. Specific binding of polysulfide ions to the organic layer results in a higher polysulfide concentration at the reaction site compared to the bulk concentration. This results in an apparent decrease of the measured equilibrium constant, K_x.     

A fluorimetric assay for cortisol

A simple, rapid and sensitive fluorimetric assay for the quantitative determination of cortisol is reported. The assay is based on the formation of a fluorescent dye when cortisol is incubated with a mixture of sulfuric acid and acetic acid. The fluorescence spectrum recorded for the resulting dye shows a maximum extinction at 475 nm and a maximum emission at 525 nm. The solvent 2-methyl-4-pentanone was used for extraction and was found to act as a fluorescence amplifier. A limit of detection of 2.7 μM was achieved, making it possible to forego solvent evaporation. The assay suffers minor interference from 11-deoxycortisol which exhibits low fluorescence at λ _ex: 460 nm; λ _em: 505 nm. Typical standard deviations were below 4%. We validated the assay using a biotransformation with recombinant Schizosaccharomyces pombe which regioselectively hydroxylates 11-deoxycortisol to cortisol. The method described herein is suitable for preliminary screening of microorganisms capable of steroid hydroxylation.     

Synthesis of oligosaccharides catalyzed by thermostable β-glucosidase fromPyrococcus furiosus

Focusing on CO₂ fixation, photoautotrophic cultivation of the red algaPorphyridium cruentum was investigated by means of a batch culture under a 5% CO₂-enriched atmosphere. The algal growth kinetics was successfully described with a logistic model, and simulation of a continuous culture under the optimum growth conditions (30°C, 12 klux and 1.18 g-cells/L) showed that the algal CO₂-fixation activity could reach 0.66 g-CO₂/(L X d). Under the same growth conditions, eicosapentaenoic acid (20:5 n-3, EPA) and arachidonic acid (20:4 n-6, ARA) yields were similarly calculated to be 3.6 mg-EPA/(L X d) and 6.5 mg-ARA/(L X d), respectively.